Odida, Child of Ala


Odida is an igbo word, meaning failure or decline.

Photograph: Nipah 
Dennis/Bloomberg/Getty Images


Expanding on the first child, born of the corruption of the environment through the presence of large oil corporations' exploitative measures, the second child is born of a bureaucratic, racist and dehumanising treatment of the land and space of those from the global south. Odida is my piece for my final major project, born from the exploration of protest and design with the subject matter of critiquing how countries in Africa are used as bins and resting places for discarded clothing from Western countries. 

Building out the mythos of the Children of the Igbo deity of the earth, Ala. This is her second child, Odida (Fall), born from the pollution and dispersement of waste over the land, desecrating fertile land with waste.

My creative approach was influenced by Nick Cave's performative work Soundsuits, Nigerian masquerade traditions, and the Congolese artist collective Ndaku Ya La Vie Est Belle, which creates intricate costumes from found materials to address political and social injustice. Their work inspired me to revisit costume-making, a practice I had explored during my MA studies

Visual references for the development of my piece.

Portraits of works by Ndaku Ya La Vie Est Belle, Captured by Stephan Gladieu

Getting started, The materials were sourced from discarded clothing given to me on request by friends, emphasizing upcycling and the excess produced by the fashion industry. I designed the work as a sculpture and a performative costume; due to little time to choreograph a performance, it will be exhibited as a sculptural piece. The headdress was a large textile ball covered in fabric, while the top and bottoms were made from torn and stitched clothing patches, creating a chaotic, patchwork effect. I crafted the pieces using a sewing machine and glue gun. However, I faced challenges with the overwhelming number of materials and lack of access to technical support as I worked out of my studio due to personal economic challenges.

Making always gets my mind working much faster than hand sketches, this was the first prototype for a fabric mask. Using the mannequin head as a frame, the cut pieces were stitched and glued together to make the piece. This is how I got started in formulating my early ideas before returning to draw full body designs.



These fabric masks were a jumping-off point; I expected to incorporate them at some point into the work, but later, I decided against it, and I worked to further develop the pieces.


I sought to explore how design can serve as political protest, critiquing systems of oppression maintained through bureaucratic and economic means. I focused on the ecological impacts of overproduction and overconsumption, especially in the fashion industry, which disproportionately affects the Global South. Western countries frequently offload their waste onto African nations, causing growing landfills and environmental devastation. This sculpture responds to that ongoing exploitation and it’s design must reflect that. 

Below you can see examples of sketches I put together with the goal to visualise a creature made of waste. Looking to design a way that the audience can grasp the subject matter of overconsumption at first glance.


Developing Sketches

Large slumping creature. Rough sketch
Rough sketch, Impregnated Mass
Impregnated and overtaken by the waste that is sent it's way, seen not as a people but a place to hide its truths
Inhuman mass of waste and clothes, performative in it’s rotation. Inspired by Egungun masquarades
The hands of Neo-colonialism, ever reaching. Rough Sketch
The sketch I began to build my work upon,  To constantly take and consume, an inescapable force. Eating away at resources. Odida is a force, an otherwordly being like other Children of Ala.

A mass of living clothes stitched and glued together. Imposing and overwhelming, Odida the living mass.



The Making Process



Unlike previous MA projects of mine, this piece was made at my personal art studio instead of the space offered by the University. This choice was made due to costs. It made it cheaper for me to return to my work, but sadly, it left me without the expertise of the technicians. The majority of this project was down to three things: cut, sew, and occasionally glue, and overtime, the pieces took shape.


The bulk of some of the early work was stitching so many pieces of clothing together to create a fabric that can be cut into shape, this took a lot of time and caused a lot of confusion in the process.

Image of the studio.
Image of the top being worked on.
Pile of clothes, cut and stitched together.
There is no table large enough for pattern cutting in this space, the floor was a good alternative with books being used as weights.
Ran out of thread a couple times.
Video of me sewing.


Images taken at my studio, as I put the pieces together and test them on myself, the outfits are made large enough to allow for movement in the case of a performance.

Dealing with the variety of different sizes, materials and fabrics was such an issue to manage in the making process, constantly adjusting the needle tension and rethreading the machine as it kept cutting as I made my way through the piece.


Videos below show me testing the outfit as I make my way through it. Making sure it holds and can still double as a performative piece if and when necessary.




Building a headpiece, I decided to use a mix of cardboard and textiles to create it. Using a flat sheet of cardboard, I cut a number of thin shallow slits to allow it to bend and curve into a cylinder that can fit on someone's head, glueing the edges to complete the form.

With the possibility of this becoming a performance piece, I wanted it to be light as a big issue from my last project was that everything was too hot and heavy, which weighed on the performance.


This design didn't make it into the final piece as it was too flimsy, and I was unsure how to make it work on a piece that, at the time, would be held purely by string. Also, it didn't really work as a design from my point of view.



Further development sketches and deciding on a direction. Through the process of making I was unsure if I would make this a performance or a sculpture, I decided on the fabric sculpture route mainly due to the lack of time, to research and choreograph a performance in time for the opening night. This may still be a possibility in the future.


Sketches trying out an updated headdress design.
Updated sketch of the overall design, late into development.

Here is the revised version of the headdress, I found a pattern online for a sphere, using that alongside scrap fabric I made the base of the piece. I went with this piece because it would be faster to execute at the time while still creating the alien feeling.

Image of ball made out of scraps of fabric to serve as the head of the piece.
Image shows scraps of fabrics glued to the ball.


Costume being worn by myself.



Sculpture Frames


In preparing the sculpture for the display, a frame or some sort of armature was needed for the fabric to rest upon. I ended up making my way through 3 possibilities.

Wire Frame

The idea was suggested by one of the technicians, and the materials were provided by the university. It took me a few days to fully build out the structure, starting with the humanoid skeleton made from wire. A long strip extended from the head, which I planned to use for the cables. I reinforced the shape by adding rolled-up portions of brown paper.


Mannequin Frame

For the second attempt at building the costume frame, I used a black mannequin from the university instead of the wireframe. It provided better support for the outfit's shape, but its rigid limbs made posing nearly impossible. The mannequin was also too heavy for suspension, and I couldn't attach the head securely, so I had to abandon this approach as well.



Wooden Armature

The wooden armature became the final frame for the sculptural piece, built by woodworking technicians to match my body measurements. It’s humanoid, lighter than the mannequin, and allows some arm mobility for posing. While padding was needed to prevent the fabric from collapsing and to enhance the shape, foam and scrunched newspaper created the desired solemn, bulbous form.


Creating a landmass of my own, I used most of the clothing I had to build the sculptural piece, aiming to give it the appearance of a large landfill. To enhance its size without needing more discarded items, I padded the base with bin bags and a roll of brown paper, making it appear much larger than it actually was.


The Sculpture Mount


A 1 metre mount was erected by the woodworking technicians for the piece, we had decided that it would be easier to manoeuvre the structure if need be.

We positioned the sculpture leaning and reaching out towards the door where the audience would enter from, with the goal to invoke the effect of this creature reaching out to consume.

The wooden frame was then screwed into the wooden mount securing the sculpture.
This left me to add the final touch which was completing the landfill mass.



Final Documentation







Reflection

While I faced challenges during the creation process, including the technical difficulties of sculptural construction and limitations due to my inexperience with large-scale works, I am proud of the final piece. Odida successfully embodies the chaotic excess and disorder inherent in waste colonialism. The work stands as a political critique, though I acknowledge that its deeper messages of spirituality and neo-colonialism may not be immediately apparent to all viewers without contextual support.

This project represents an evolution in my artistic practice, compelling me to confront the paradox of critiquing environmental degradation through the creation of material objects. My aim with this work is not just to create a visually striking piece but to ignite critical conversations about the ongoing exploitation of African nations and the complicity of the Global North in perpetuating these destructive cycles.


Child of Ala: Odida is an invitation to reflect, reconsider, and resist the systems that fuel environmental and spiritual decline.